Skip to product information
1 of 3

Custom Length - Grease Fitting Relocation Hose

Custom Length - Grease Fitting Relocation Hose

Enter your hose length below in feet and inches. The maximum length is 12'-0". If you enter a length over 12' the options will revert back to 12'.

Product Description

This is the hose that will relocate your hard to reach grease fittings to any convenient location. The 1/8″ inside diameter saves grease because one ounce of grease will fill 12′ of hose. High pressure rated hose will withstand the extreme pressures generated by grease guns. Hoses tolerate equipment vibration and will flex with moving machinery.

Hose End Threads
All grease fitting relocation hoses come with a 1/8″ male NPT thread on the grease port end and a 1/8″ female NPT thread on the bulkhead fitting. A 1/8″ NPT grease fitting is installed on the bulkhead fitting end of the hose.  Hose length will be measured from the tip of the grease port fitting to the face of the bulkhead on the other end. These are custom made hoses and delivered length may vary by up to half an inch from the specified length.

Note:  The bearing end of our extension hoses has a 1/8″ NPT Male thread.  Thread adapters will be required for bearings with other thread types.

Included Hardware

  • 1/8″ inside diameter grease extension hose made to your measurements.
  • Bulkhead fitting on grease fitting end of the hose.
  • 1/8" NPT thread on bearing end of the hose.
  • Standard Zerk style grease fitting is installed but any style grease fitting with a 1/8″ NPT thread can be installed in the field.

Note: Please measure carefully.  Custom length hoses are made to your specifications, custom length hoses are not returnable unless defective.

Specifications:

  • Hose Strength: 2,500 psi continuous, 10,000 psi. bursting pressure
  • Minimum Bending Radius: 1.8″
  • Dimensions: 1/8″ ID x .32″ OD x your specified length
  • Bulkhead Mounting Hole: 7/16″ diameter in material up to 1/2″ thickness
  • Temperature Range:  -40ºF to 200ºF
  • Finish: hose ends and fittings have a corrosion resistant trivalent chromium finish.

Extra Long Hoses:

We can fabricate hoses that are longer than 12 feet. However, there are risks associated with using longer hoses.  If you are interested in a longer hose, please read "Can I Order Hoses Over Twelve Feet Long?" on our FAQ page first.  Then contact us here and we can send you a quote.

View full details

Trusted By America's Top Companies

Customer Reviews

Based on 20 reviews
90%
(18)
5%
(1)
0%
(0)
0%
(0)
5%
(1)
t
terry g. (Grove City, US)
case ih combine

Installed several grease tubes on had to get to places on a 2188 combine, worked great. In my case I needed the adaptors to get hoses to fit, so don't forget to order a few.

C
Chris A. (Raleigh, US)
Installed On: Pallet elevator
Great products!

The products I ordered were exactly what I was needing and hoping for. Very well made easy to install.

A
ALEX W. (Lamar, US)
Installed On: Case Dozer
Great Quality Parts

Bought these to replace grease hoses on a dozer. Only suggestion would be the "bulkhead" piece that is JIC on one end with the nut. I would switch that around so you could attach the hose and then feed the threads through the hole for the grease hose and secure with the lock nut

M
Mike E. (Harlan, US)
Installed On: john deere combine

good stuff

C
Caleb M. (Palo Cedro, US)
Great Product

This product is well made and a perfect solution for those hard to reach grease fittings. Ordering is simple and delivery is quick.